Modeling a Four Echelon Omni-Channel Supply Chain for Seasonal Product under Stochastic Demand
Fatemeh
Mohaghar
Ph.D. Candidate, Department of Industrial Engineering, School of Industrial Engineering, Alborz Campus, University of Tehran, Tehran, Iran.
author
Fariborz
Jolai
Prof., Department of Industrial Engineering, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran.
author
Jafar
Heydari
Associate Prof., Department of Industrial Engineering, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran.
author
text
article
2020
per
Objective: The present work proposes a mathematical model for a four-echelon supply chain network for a seasonal product with stochastic demand. The supply chain structure includes a supplier, a producer, a distributor, and a retailer with three sale channels.
Methods: The methodology introduced in this paper is a fundamental yet practical one that expands the knowledge of modeling for omnichannel supply chain and examines the outcomes in a real case study using a quantitative approach. In this case study, the retailer and the distributor are decision-makers, who decide the optimum order quantity. First, the centralized and decentralized models are identified. Second, the optimum order quantity for each model is determined, and finally, the results are verified using a numerical approach. Further, a sensitivity analysis is performed on the parameters that affect the profits obtained by members and the supply chain.
Results: Numerical examples show that the supply chain profit in the centralized model is more than the decentralized model, which correctly predicts the models and the estimated optimum order quantities.
Conclusion: The results of the sensitivity analysis show that the expected value of the members and the supply chain profit will increase when the final selling price and production capacity are increased. However, the increasing rate of profit obtained by increasing the selling price is higher than that of production capacity.
Industrial Management Journal
University of Tehran
2008-5885
12
v.
2
no.
2020
206
235
https://imj.ut.ac.ir/article_79167_7a92531f2d28c39380c35bee31743906.pdf
dx.doi.org/10.22059/imj.2020.306753.1007759
An Inventory Control Model for Deteriorating Items with Inventory and Inspection Costs Considering Errors in Inspection
Mohsen
Bagheri
Assistant Prof., Department of Industrial Engineering and Management, Sadjad University of Technology, Mashhad, Iran.
author
Amir
Moradi
M.Sc., Department of Industrial Engineering, Sadjad University of Technology, Mashhad, Iran.
author
text
article
2020
per
Objective: In this paper, we introduce a new model in the interesting domain of deteriorating item inventory control models. In our model, we consider inspection and inspection errors in which literature models are noticeably rare.
Methods: We conduct a vast literature study resulting in a proper understanding of literature shortcomings, and develop a new model via operational research model building methods. To solve and analyze the model we implement analytical continuous methods. The MATLAB (R2016b) software tools are used for sensitivity analysis and further study.
Results: The assumptions of inspection and inspection errors in deteriorating item inventory control models lead to a more realistic model. Also, numerical results show the importance and effect of such assumptions.
Conclusion: We provide a number of profit increasing managerial insights based on values of order quantity, inspection time, replenishment period, etc., via the solution and sensitivity analysis of the new model.
Industrial Management Journal
University of Tehran
2008-5885
12
v.
2
no.
2020
236
248
https://imj.ut.ac.ir/article_79168_cfdd9c99555a75662abb673d1f4f8364.pdf
dx.doi.org/10.22059/imj.2020.273828.1007547
Identifying Causal Loops for Common Approaches of the EFQM Excellence Model
Ali
Ebadi Ziaei
Ph.D. Candidate, Department of Industrial Management, Faculty of Management, University of Tehran, Tehran, Iran.
author
Ali
Mohaghar
Prof., Department of Industrial Management, Faculty of Management, University of Tehran, Tehran, Iran.
author
Adel
Azar
Prof., Department of Industrial Management, Faculty of Management and Economics, Tarbiat Modares University, Tehran, Iran.
author
Mohammad Reza
Sadeghi Moghadam
Associate Prof., Department of Industrial Management, Faculty of Management, University of Tehran, Tehran, Iran.
author
Hossein
Safari
Prof., Department of Industrial Management, Faculty of Management, University of Tehran, Tehran, Iran.
author
text
article
2020
per
Objective: Nowadays, entering the field of quality management is one of particular importance to organizations. This is due to the intense competition, globalization and diversified product services that have made the need for quality development at all levels in organizations inevitable. The country's banking system is no exception because of the fierce competition. Organizational Excellence Models are the tools that guide organizations along this path. Organizations including the country's banking network, are adopting a variety of approaches within their organization to realize the values of excellence models. However, the limitation of available resources such as cost, manpower, organizational culture, etc. does not allow all of these approaches to be deployed. Therefore, the key question is which approaches will have the most impact on quality improvement. Methods: The main purpose of this study is to explore the dynamic relationships between approaches and criteria and sub-criteria of EFQM organizational excellence model. For this purpose, first, the usual approaches in organizational excellence model are extracted and due to their high volume, they are clustered by fuzzy clustering method and finally, causal loops between variables are extracted by system dynamics method. Results: The result of leading research is the causal linkage model between the categories of common approaches in the organizational excellence model. Conclusion: Conclusion: In this study, common approaches in I.R. Iran’s banking network are identified and during of using system dynamics, it is possible to simulate the behavior of the system using causal loops.
Industrial Management Journal
University of Tehran
2008-5885
12
v.
2
no.
2020
249
270
https://imj.ut.ac.ir/article_79169_b2f2d788fefe7cb0f8156c9281b0fee1.pdf
dx.doi.org/10.22059/imj.2020.295802.1007707
Evaluating and Analyzing Sustainable Development Policies in the Oil Products Transportation Network with a System Dynamics Approach
Somayeh
Ghezavat
Ph.D. Candidate, Department of Industry Management &Information Technology, Management and Accounting Faculty, Shahid Beheshti University, Tehran, Iran.
author
Behroz
Dori Nokorani
Prof., Department of Industry Management &Information Technology, Management and Accounting Faculty, Shahid Beheshti University, Tehran, Iran.
author
Masood
Rabieh
Assistant Prof., Department of Industry Management &Information Technology, Management and Accounting Faculty, Shahid Beheshti University, Tehran, Iran.
author
Mostafa
Zandieh
Associate Prof., Department of Industry Management &Information Technology, Management and Accounting Faculty, Shahid Beheshti University, Tehran, Iran.
author
text
article
2020
per
Objective: Today, one of the most important concerns of the oil industry is sustainable development. Achieving sustainability requires recognizing the factors that affect sustainability, their dynamic relationships, and the right decisions of senior executives. The purpose of this paper is to evaluate and analyze the sustainable development policies of the Iranian oil products transportation network based on the dynamic behavior of sustainability variables.
Methods: In this study, the factors affecting economic, social and environmental sustainability were identified based on the research background and the opinion of industry experts and the dynamic model of sustainability of this network was designed with the system dynamics approach. Optimal policies with different sustainability strategies were then evaluated and analyzed based on the behavior of the main variables of sustainability.
Results: Based on the background of research and opinion of industry experts, 22 factors were selected as factors affecting economic, social and environmental sustainability and five strategies including reducing transportation costs, increasing community satisfaction, reducing environmental pollution, reducing accidents and combining all the cases were considered to achieve sustainability in the National Iranian Oil Products Distribution Company. By applying policies appropriate to each strategy and comparing their results, it was found that the behavior of the main variables of sustainability shows a better trend by adopting the Fifth Strategy (Comprehensive Development).
Conclusion: This research showed that sustainable development can be achieved by recognizing the factors affecting sustainability and causal relationship between them and evaluating and analyzing comprehensive sustainability policies based on the behavior of the main variables of sustainability.
Industrial Management Journal
University of Tehran
2008-5885
12
v.
2
no.
2020
271
298
https://imj.ut.ac.ir/article_79172_75c4cdbeaa3f11e8a7f8f335e70ce1fd.pdf
dx.doi.org/10.22059/imj.2020.300826.1007732
Designing a Competency Model for Creative Industry Leaders using Discrete Consensus Support Methods and Interpretive Structural Modeling
Seyed Mahdi
Sharifi
Associate Prof., Department of Business Management, Faculty of Management, University of Tehran, Tehran, Iran.
author
Ali Akbar
Farhangi
Prof., Department of Media Management, Faculty of Management, University of Tehran, Tehran, Iran.
author
Ali
Heidari
Assistant Prof., Department of Business Management, Faculty of Management, University of Tehran, Tehran, Iran.
author
Seyed Vahid
Agili
Associate Prof., Department of Social Communication and Journalism, Faculty of Communication Sciences and Media Studies, Azad University, Tehran, Iran.
author
Fatemeh
Mirzaei Rabor
PhD, Department of Media Management, Faculty of Management, University of Tehran, Tehran, Iran.
author
text
article
2020
per
Objective: With changes in audience behavior, the growth of information and communication technologies, globalization as well as the removal of business market constraints, creative industries and media organizations need to adapt more quickly to these changes, and effort to compatibility leads to more business dynamics. In this regard, relying on organizational assets and capitals ensures success. One of the key assets of the creative industry is the competencies of leaders. The purpose of this study is to design a competency model for creative industry leaders. This model is used to select and hire leaders, develop and train them, identify the talents of creative industries, promote and appoint them.
Methods: In this paper, both qualitative and quantitative approaches in two main steps were used. In the first step, the main competencies of creative industries leaders identified and in the second step, the conceptual model od competencies developed.
Results: To identify competencies, Systematic Literature Review (SLR) has been used and 50 competencies have been identified. Then, through Discrete Consensus Support Method (DCSM), these competencies are filtered, reduced and reached to 40 cases. Finally, through the Structural Interpretive Modeling (ISM), the conceptual model of 16 competencies has been developed. In four levels: basic, behavioral, technical and excellence.
Conclusion: According to the final model of competency, creative industry leaders should have four clusters of competencies: basic, behavioral, technical and excellence.
Industrial Management Journal
University of Tehran
2008-5885
12
v.
2
no.
2020
299
318
https://imj.ut.ac.ir/article_79173_b47cf5d3bad5b905c9fdfff24d4a3cdf.pdf
dx.doi.org/10.22059/imj.2020.307585.1007763
The Design of a Multi-directional Network Chain Model Offering a Closed Loop in the Automotive Industry by Providing Energy and Time Efficiency Programs
Saeed
Aminpour
Ph.D. Candidate, Department of Industrial Management, Qazvin Branch, Islamic Azad University, Qazvin, Iran.
author
Alireza
Irajpour
, Assistant Prof., Department of Industrial Management, Qazvin Branch, Islamic Azad University, Qazvin, Iran.
author
Mehdi
Yazdani
Assistant Prof., Department of Industrial Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran.
author
Ali
Mohtashami
Associate Prof., Department of Industrial Management, Qazvin Branch, Islamic Azad University, Qazvin, Iran.
author
text
article
2020
per
Objective: Today, green supply chain managers in leading companies strive to offer green logistics and improve their environmental performance throughout the supply chain as a strategic weapon to gain a sustainable competitive advantage by creating profitability and satisfaction across the supply chain. Therefore, considering the purpose of the research, which is to design a multi-objective model of closed-loop supply chain networks in the automotive industry according to energy efficiency and time efficiency plans, we try to model the closed-loop supply chain in the automotive industry.
Methods: In this study, we use the MOPSO method to facilitate its implementation and its ability to provide good convergence, as well as to maintain a proper balance between exploitation and exploration, as well as the NSGA II genetic algorithm.
Results: In the study of the findings of the proposed algorithms, it found that the average error resulting from these algorithms is less than 0.04. The results also show that the proposed algorithms have the necessary efficiency in solving these problems.
Conclusion: We note the significant findings of our model as follows: (1) An efficient closed-loop network that shows the economic benefits of considering the value of time due to the recycling of worn-out products. (2) Has the ability to demonstrate the capacity to achieve maximum benefits in terms of cost value as well as environmental prospects.
Industrial Management Journal
University of Tehran
2008-5885
12
v.
2
no.
2020
319
343
https://imj.ut.ac.ir/article_79174_37112c545d467683a9cb7b57a49ccd2d.pdf
dx.doi.org/10.22059/imj.2020.304115.1007743
Identify the Major Factors Affecting the Success of Open Innovation in the Digital Knowledge-based Business Ecosystem
Erfan
Hajiakhoondi
Ph.D. Candidate, Department of Technology Management, Faculty Management and Economics, Science and Research Branch, Islamic Azad University, Tehran, Iran.
author
Gholamreza
Hashemzadeh Khorasgani
Associate Prof, Department of Industrial Management, Faculty of Management, Islamic Azad University of South Branch, Tehran, Iran.
author
Alireza
Boushehri
Assistant Prof., Department of Technology Management, Faculty of Management, Malek Ashtar University, Tehran, Iran.
author
text
article
2020
per
Objective: This study aims to identify the major factors that affect the success of open innovation in the digital business ecosystem. Methods: After initial identification of the factors influencing the background, a survey was conducted in the digital business ecosystem using a sample of 70 experts. The research community includes all organizational experts and experts active in digital knowledge-based businesses. In this study, exploratory factor analysis has been used to measure divergent validity and the accuracy and significance of the relationships between these variables and confirmation of the measurement and structural model by confirmatory factor analysis or structural equations based on PLS and SPSS and Smart PLS software have been investigated. Results: The exogenous structures of the model together account for 62% of the variance of the structure of open innovation success, and the structures of the regulatory and regulatory environment, financial support and intermediary institutions have the most relevance and importance in the success of open innovation, respectively. Also, the value of Q2 index of the model is equal to 0.392, which indicates that the proposed model has a good predictive fit. Conclusion: It is suggested that governments and policymakers implement strategies such as encouraging venture capital and crowd funding, tax incentives, establishing an efficient legal system for the protection of intellectual property, establishing open innovation platforms and technology hubs, and other research findings. In this way, a suitable ecosystem for the implementation of open innovation strategies in digital businesses is formed.
Industrial Management Journal
University of Tehran
2008-5885
12
v.
2
no.
2020
344
372
https://imj.ut.ac.ir/article_79175_fa179e0ef7d152761403f759b4ad25f0.pdf
dx.doi.org/10.22059/imj.2020.312769.1007796